Home /
BFT ARES 1000 Fast Slide Gate Operator - P926183 00005

BFT ARES 1000 Fast Slide Gate Operator - P926183 00005

BFT ARES 1000 Fast Slide Gate Operator - P926183 00005 Technical Drawing

The BFT ARES 1000 is an automatic slide gate opener that is capable of moving slide gates weighing up to 1100 pounds at the fast speed of 7.9 inches per second.

Part Number: P926183 00005

Details

BFT ARES 1000 Fast Slide Gate Operator - P926183 00005

The BFT ARES 1000 is an automatic slide gate opener that is capable of moving slide gates weighing up to 1100 pounds at the fast speed of 7.9 inches per second. The BFT ARES is among the "medium to heavy" capable weight range, making it perfect for commercial or light industrial use. An optional, but highly recommended, battery backup unit is available for the ARES gate opener that fits perfectly inside the operator casing. With a battery backup system you no longer have to worry about power outages making your gate inoperable.

**Please Note: This Product Has Been Discontinued and Replaced By BFT Part Ares 1500 Ultra BT A 120V Slide Gate Operator - P926192 00001.

Ecosol Compatible

The ARES 1000 gate operator is compatible with our Ecosol solar powered kit which includes everything you need to go solar and save on your energy bill month after month!

Low Voltage Motor

The 24v electrical motor guarantees maximum accuracy in torque and speed control and makes it suitable for intensive gate use, even in industrial installations.

Compatible Racks

A rack sliding gate requires a rack to be used with your sliding gate. Below are the compatible racks we sell for the ARES series of slide gate openers.

CFZ - 6 1/2 ft galvanized steel rack
CVZ - 3 1/4 ft galvanized steel rack
CP - 3 1/4 ft plastic rack

Specifications

Control Panel: HQSC-D (included)
Reversible/Irreversible Operator: Irreversible
Power Supply: 24v
Absorbed Power: 240W
Thermal Protection: Integrated in the control unit
Leaf Speed: 7.9 ips (9 m/min)
Output Rotational Speed: 39 rpm
Pinion Pitch: 4 mm (25 teeth)
Impact Reaction: Electronic torque limiter
Limit Switches: Electromechanical
Manual Release: Mechanical release with knob
Operating Cycle: Intensive use
Environmental Conditions: From 5°F (-15°C) to 140°F (+60°C)
Degree of Protection: IP24
Operator Weight: 44 lbs
Fuse Value (QSC Board Transformer): 0.63A T
Fuse Value (QSC Board Logic Unit): 2A T

The control board is included in this unit and does not have to be separately purchased for operation, however we do have available replacement HQSC-D control boards for the ARES 1000 if one is needed.