BFT Dampy B Series 220 mm Cylinder 700 mm High Semi-Automatic Gas Sping Bollard (Stainless Steel) - P970087 00002

Details

BFT Dampy B Series 220 mm Cylinder 700 mm High Semi-Automatic Gas Sping Bollard (Stainless Steel) - P970087 00002

The BFT Dampy B 219/700 is a semi-automatic gas bollard designed for control of access roads. This bollard is controlled with an end stroke automatic locking system and uses its gas operator for assisted shaft rising. The mechanism release system is key operated using a standard triangular bit release key. In order to keep aesthetic consitency, this bollard features LED lights and is designed stylistically identical to the automatic bollards. This bollards semi-automatic design allows for frequent manipulation, allowing for efficient access control.

Reference Standards

• 2004/108/CEE; 93/68/CEE (EN55014-1; EN55014-2) - Electromagnetic Compatibility
• 2006/95/CEE; 93/68/CEE (EN60335-1(2002)) - Low voltage
• 2006/42/CEE (EN60204-1) - Machinery Directive

Features:

• Drived Rod out of Ground: 8.66 in x h. 27.56 in (±0.12in) x th. 0.20 in, steel Fe 360
• Buried Structure: ~11.61 x h. ~45.87 in
• Foundation: Concrete
• Excavation: ~39.37 x ~39.27 x h. ~55.12 in.
• Break-In Resistance: 150,000 J
• Allowable Axial Static Load: Bollard up max 3,000 N; bollard down max 150,000 N
• Driven Rod Treatment: AISI304 or AISI316 stainless steel
• Passive Visibility: Reflective Film (optional)
• Flange: Cast-Iron, cataphoresis black
• Top Cover: Cast-Iron, cataphoresis black
• Lifting: By means of a gas spring

Electrical Features:

• Light Power Supply: ALLU
• Power: Light cable 24 Vac +/- 10%, 50-60 Hz (up to 80 bollards)
• Power Consumption: 1 W per bollard
• Signalling: On the top with high intensity LEDs and buzzer (optional)

Manual

Specification Sheet