BFT Deimos BT Slide Gate Opener
Please Note: This Product Has Been Discontinued & Replaced By BFT Deimos Ultra BT A600 UL/CSA With 1 Mitto Transmitter - R925292 00003.
The BFT Deimos BT UL/CSA slide gate operator is capable of moving massive gates weighing up to 1,100 pounds and measuring up to 75 feet in length.
The Deimos features many smart technology features that continue to lead the industry, such as electromechanical microswitches that control the end of stroke, an incorporated two-channel rolling code radio receiver, and a self contained control unit with self-learning & self-diagnostic functions that is also compatible with the EELink protocol.
This unit, powered at 24V, has been specially designed for simpler and faster installation in compliance with the latest safety standards. Thanks to the units obstruction sensing device, the gate operator reverses motion and prevents damage to people and vehicles in the event of detecting contact.
Many features of the Deimos make installation and operation simpler than ever. The Deimos slide gate opener has an incorporated control board (meaning you don't have to buy one separately) positioned right on front for easy accessibility. This control unit can easily be programmed using the LCD display.
- Control Panel: QSC D UL (included)
- Reversible/Irreversible Operator: Irreversible
- Power Supply: 24v
- Absorbed Power: 0.1 hp (70 W)
- Thermal Protection: Integrated in the control unit
- Leaf Speed: 7.9 ips (12 m/min)
- Output Rotational Speed: 79 rpm
- Pinion Pitch: 4 mm (14 teeth)
- Impact Reaction: Electronic torque limiter
- Limit Switches: Electromechanical
- Manual Release: Mechanical release with knob
- Operating Cycle: Intensive use
- Environmental Conditions: From 5°F (-15°C) to 140°F (+60°C)
- Degree of Protection: IP24
- Operator Weight: 16 lbs
- Fuse Value (QSC Board Transformer): 0.63A T
- Fuse Value (QSC Board Logic Unit): 2A T
A rack sliding gate requires a rack to be used with your sliding gate. Below are the compatible racks we sell for the ARES series of slide gate openers.
- CFZ - 6 1/2 ft galvanized steel rack
- CVZ - 3 1/4 ft galvanized steel rack
- CP - 3 1/4 ft plastic rack
To make your gate operation continue smoothly during power outages, an optional battery back-up unit (P125002) can be fitted directly within the operator casing. This smart battery backup system will charge the batteries while power is supplied, and once a power loss is detected it will switch over to emergency battery power. Never worry about a power outage again!
Solar Powered Option
It's never been easier to upgrade your gate operator by powering it through solar energy. We have a complete solar powered kit that will upgrade your system to run off of the free energy of the sun, saving you on your energy bill month after month. These ECOSOL solar powered systems can easily be upgraded. You can upgrade the battery capacity by simpling attaching a double battery expansion kit, or you can increase the charge rate by adding additional solar panels.
|Slide Gate Model||Deimos|
|Max Gate Weight||1100 lbs|
|Max Gate Length||75 ft|
|Leaf Speed||7.9" per second|
You may also be interested in the following product(s)
BFT Cp 22X22 4Mm-Pitch Adjustable Plastic Rack
BFT Deimos Sb-Bat 24V DC Battery Backup
BFT Ecosol Basic "Add-On" Solar Kit With 7.2 Amp/h Batteries, Solar Panel, 15' Cable
BFT Cfz 22X22 4Mm-Pitch Galvanized Steel Rack
BFT CVZ 30X12 4Mm-Pitch Adjustable Galvanized Steel Rack
BFT MITTO 2 Button Transmitter For BFT Gate Openers (12V)