BFT Igea BT Single Swing Gate Opener - P935070 00002

The IGEA BT from BFT is a single swing gate operator capable of moving gates with a leaf length of up to 10' and weight of up to 550 lbs. This gate operator was designed for use in residential applications.

*** This product has been discontinued and replaced by IGEA BT UL Electromechanical Swing Gate Opener. ***

Part Number: P935070-00002
 

Details

BFT Igea BT Single Swing Gate Opener - P935070 00002

*** This product has been discontinued and replaced by IGEA BT UL Electromechanical Swing Gate Opener. ***

The IGEA BT from BFT is a single swing gate operator capable of moving gates with a leaf length of up to 10' and weight of up to 550 lbs. This gate operator was designed for use in residential applications. This gate opener has incredible versatility due to the levers that permit installation on large sized pillars, opening up to 125°.

Smart Technology

Features a state of the art control unit compatible with the EELink protocol.

Safe Use

The IGEA swing gate operator is powered at 24V, and has been specially designed for simpler and faster installation in compliance with the latest safety standards. Thanks to the obstruction sensing device, the operator reverses motion and prevents damage to people and vehicles in the event of detecting contact.

Simpler Installation

BFT features a unique system of coded magnetic limit switches making it possible to reduce the complexity of wiring the low-voltage motors. In this system just a single wire is carried to the control panel instead of the three or five wires that are normally required, thereby increasing both the simplicity and speed of installation. Another benefit of this BFT operator is that the system is able to automatically distinguish between the open limit switch and the closed one, preventing wasted time and wiring errors.

Solar Solution

The BFT IGEA BT is compatible with our Ecosol solar power system, making it easier than ever to save month after month by using this clean and cheap alternative energy option.

Battery Backup

An optional battery backup system is available for the BFT IGEA series of gate operators, taking all the worry out of power outages. The battery backup features a board that charges the battery while power is available, and activates the battery once power is lost - so you don't lose gate operation during a loss of power.

Specifications

  • Control Panel: LIBRA UL R (Required for operation)
  • Reversible/Irreversible Operator: Irreversible
  • Power Supply: 120 V 60 Hz single-phase
  • Absorbed Power: 0.05 hp (40 W)
  • Opening: Up to 125°
  • Thermal Protection: Integrated in the control panel
  • Opening or Closing Time: 15s
  • Impact Reaction: Torque limiter integrated in the control panel
  • Lock: Mechanical opening/closing
  • Manual Release: Release knob with personalized key
  • Operating Cycle: Intensive use
  • Environmental Conditions: From 5°F (-15°C) to 140°F (+60°C)
  • Degree of Protection: IP44
  • Operator Weight: 35 lbs
  • Fuse Value LIBRA Board Transformer: 2A T
  • Fuse Value LIBRA Board Logic Board: 1A T

Prefer to Call? (888) 378-1028

Questions about part number P935070-00002?

Required Fields *

Name *

Email *

Phone

My Questions *

SKU P935070-00002
Alternate Part Number 2600414
Swing Gate Model Igea
Operator Type Single
Max Gate Length 10 ft
Max Gate Weight 550 lbs
Opening or Closing Time 15 seconds


You may also be interested in the following product(s)