BFT Sub G UL/CSA DX Swing Gate Opener 120V - P930010 00007
Details
BFT Sub G UL/CSA DX Swing Gate Opener 120V - P930010 00007
*** This product has been discontinued and replaced by BFT Sub G 110/120V 60Hz. ***
The BFT SUB G UL/CSA DX hydraulic swing gate operator is capable of moving swing gates up to 1750 pounds and 11 ft 6 in long. The DX line of SUB swing gate openers has the motor is on the right hand side of the driveway from inside the property.
Simple Maintenance & Installation
Maintenance is carried out without any need to raise or disassemble the gate. The SUB series of gate openers features a special foundation case that makes it possible to remove the operator without taking off the gate leaf.
- Control Panel: RIGEL 6 (required, not included)
- Reversible/Irreversible Operator: Irreversible
- Power Supply: 120 V, 60 Hz single-phase
- Absorbed Power: 0.33 hp (250 W)
- Thermal Protection: Integrated
- Opening Angle: 180°
- Opening or Closing Time: 14s
- Slowdown: Opening / Closing
- Impact Reaction: Hydraulic clutch
- Lock: Hydraulic opening/closing
- Manual Release: Release key
- Operating Cycle: Intensive use
- Environmental Conditions: From 14°F (-10°C) to 140°F (+60°C)
- Degree of Protection: IP67
- Operator Weight: 48 lbs
- Fuse Value Rigel 5 Board Transformer: 2A T
- Fuse Value Rigel 5 Board Logic Board: 1A T
| SKU | P930010-00007 |
|---|---|
| Swing Gate Model | Sub |
| Operator Type | Single |
| Max Gate Length | 11.5 ft |
| Max Gate Weight | 1750 lbs |
| Opening or Closing Time | 33 seconds |
