BFT Sub G UL/CSA SX Swing Gate Opener 120V - P930010 00008

The SUB G UL/CSA SX hydraulic gate operator is UL 325 compliant and handles swing gates up to 1750 pounds and 11' 6" long. Motor is on the left hand side of the driveway from inside the property.


*** This product has been discontinued and replaced by BFT Sub G 110/120V 60Hz. ***



Part Number: P930010-00008

Details

BFT Sub G UL/CSA SX Swing Gate Opener 120V - P930010 00008

*** This product has been discontinued and replaced by BFT Sub G 110/120V 60Hz. ***

The BFT SUB G UL/CSA SX hydraulic swing gate operator is capable of moving swing gates up to 1750 pounds and 11 ft 6 in long. The SX line of SUB swing gate openers has the motor is on the right hand side of the driveway from inside the property.

Simple Maintenance & Installation

Maintenance is carried out without any need to raise or disassemble the gate. The SUB series of gate openers features a special foundation case that makes it possible to remove the operator without taking off the gate leaf.

  • Control Panel: RIGEL 6 (required, not included)
  • Reversible/Irreversible Operator: Irreversible
  • Power Supply: 120 V, 60 Hz single-phase
  • Absorbed Power: 0.33 hp (250 W)
  • Thermal Protection: Integrated
  • Opening Angle: 180°
  • Opening or Closing Time: 14s
  • Slowdown: Opening / Closing
  • Impact Reaction: Hydraulic clutch
  • Lock: Hydraulic opening/closing
  • Manual Release: Release key
  • Operating Cycle: Intensive use
  • Environmental Conditions: From 14°F (-10°C) to 140°F (+60°C)
  • Degree of Protection: IP67
  • Operator Weight: 48 lbs
  • Fuse Value Rigel 5 Board Transformer: 2A T
  • Fuse Value Rigel 5 Board Logic Board: 1A T
SKU P930010-00008
Swing Gate Model Sub
Operator Type Single
Max Gate Length 11.5 ft
Max Gate Weight 1750 lbs
Opening or Closing Time 33 seconds