BFT SUB R DX Underground Automatic Swing Gate Opener (Right-Hand Orientation) 120V - P930012 00007

The BFT SUB R UL/CSA DX hydraulic swing gate operator is capable of moving swing gates up to 1750 pounds and 11 ft 6 in long. The DX line of SUB swing gate openers has the motor is on the right hand side of the driveway from inside the property. It is UL- and CSA-listed.
Part Number: P930012 00007

$1,181.64 each
OR

Details

BFT SUB R DX Underground Automatic Swing Gate Opener (Right-Hand Orientation) 120V - P930012 00007

The BFT SUB R UL/CSA DX hydraulic swing gate operator is capable of moving swing gates up to 1750 pounds and 11 ft 6 in long. The DX line of SUB swing gate openers has the motor is on the right hand side of the driveway from inside the property.

Simple Maintenance & Installation

Maintenance is carried out without any need to raise or disassemble the gate. The SUB series of gate openers features a special foundation case that makes it possible to remove the operator without taking off the gate leaf.

  • Control Panel: RIGEL 6 (required, not included)
  • Reversible/Irreversible Operator: Irreversible
  • Power Supply: 120 V, 60 Hz single-phase
  • Absorbed Power: 0.33 hp (250 W)
  • Thermal Protection: Integrated
  • Opening Angle: 125°
  • Opening or Closing Time: 14s
  • Slowdown: Opening / Closing
  • Impact Reaction: Hydraulic clutch
  • Lock: Hydraulic opening/closing
  • Manual Release: Release key
  • Operating Cycle: Intensive use
  • Environmental Conditions: From 14°F (-10°C) to 140°F (+60°C)
  • Degree of Protection: IP67
  • Operator Weight: 48 lbs
  • Fuse Value Rigel 5 Board Transformer: 2A T
  • Fuse Value Rigel 5 Board Logic Board: 1A T

BFT Sub Cut Sheet

BFT Sub Manual

Manual

Specification Sheet

SKU P930012 00007
Alternate Part Number 2611675
Swing Gate Model Sub
Operator Type Single
Max Gate Length 11.5 ft
Max Gate Weight 1750 lbs
Opening or Closing Time 14 seconds
Voltage 120 V


You may also be interested in the following product(s)