BFT Virgo Sq Swing Gate Opener [No Control Panel] - P930117 00002

The BFT Virgo SQ is an electromechanical swing gate operator capable of moving gates up to 440 lbs and 6 ft 6 in in length. The Virgo SQ does not include a control board, the SQ is to be used with an existing Virgo to operate a 2nd gate in a dual gate system.
Part Number: P930117 00002

$442.36 each
OR

Details

BFT Virgo Sq Swing Gate Opener [No Control Panel] - P930117 00002

The BFT Virgo SQ is an electromechanical swing gate operator capable of moving gates up to 440 lbs and 6 ft 6 in in length. The Virgo SQ is not for operating a gate on it's own as it does not include a control board, the SQ is for incorporating into an existing Virgo system to operate a 2nd gate in a dual gate setup. We also have available the standard Virgo swing gate opener for operating single swing gates or to get you started on your dual gate system.

The unit features levers that permit installation on columns for an opening of up to 120 degrees. The Virgo by BFT was designed with safety in mind, featuring an obstruction sensing device that makes the operator reverse motion and prevent damage to cars or people at the event of sensing contact.

Specifications

  • Control Panel: LINX (Not Included in SQ model)
  • Reversible/Irreversible Operator: Irreversible
  • Power Supply: 120V - 24V motor
  • Absorbed Power: 0.05 hp (40 W)
  • Opening: Up to 120°
  • Thermal Protection: Integrated in the control unit
  • Opening and Closing Time: 14s
  • Impact Reaction: Electronic torque limiter integrated in the control panel
  • Lock: Mechanical on opening/closing
  • Manual Release: Release lever with key
  • Operating Cycle: Intensive use
  • Environmental Conditions: From -5°F (-15°C) to 140°F (+60°C)
  • Degree of Protection: IP44
  • Operator Weight: 13 lbs (~6 kg)

Solar Solution

The BFT Virgo is compatible with our Ecosol solar power system, making it simple to upgrade your gate operator with energy efficient solar power.

Battery Backup

Losing gate operation during a power outage can be a major hassle. Take all the worry out of power outages with a highly recommended battery backup system, available for the BFT Virgo gate opener. The battery backup features a board that charges the battery while power is available, and activates the battery once power is lost.

Mitto 2 Transmitter

The Mitto 2 transmitter is available for the BFT Virgo gate opener if you need to wirelessly operate your gate from a remote.

SKU P930117 00002
Swing Gate Model Virgo
Operator Type Single
Max Gate Length 6.5 ft
Max Gate Weight 440 lbs
Opening or Closing Time 14 seconds
Voltage 120 V