BFT Pillar B Series 275/600 Automatic Hydraulic-Powered Bollard (Stainless Steel) - P970092-1

The BFT Pillar B is an automatic bollard that is designed for intense use at high-security locations. This BFT model has a rise and close time of 5 seconds and is made from stainless steel. The Pillar B can withstand extreme weather conditions, can withstand excessive force, and has a fail-safe to raise the bollard in case of loss of power, keeping your location secure at all times.

  • Bollard Height: 23.62 in.
  • Bollard Diameter: 10.83 in.

Part Number: P970092-1
 

Details

BFT Pillar B Series 275/600 Automatic Hydraulic-Powered Bollard (Stainless Steel) - P970092-1

The BFT Pillar B automatic bollard is designed for the defense of high-security areas (churches, airports, barracks). In the event of a power outage, the shaft of the bollard lowers automatically. Made with strong AISI304 or AISI316 stainless steel, this model built is to withstand an excessive amount of force. With a powerful hydraulic operator, this model is capable of a rise time of 5.0 seconds or less. The Pillar B is capable of enduring varying weather conditions as a result of its operating ambient temperature of -40°F - 140°F (with heater).

This bollard has met various standards of:

  • 2004/108/CEE; 93/68/CEE (EN55104-1; EN55014-2) - Electromagnetic Compatibility
  • 2006/95/CEE; 93/68/CEE (EN60335-1(2002)) - Low Voltage
  • 2006/42/CEE ( EN60204-1 ) - Machinery Directive
  • 99/5/CEE ( ETSI EN 301 489-3 (2002) + ETSI EN 301 498-1 (2005); ETSI EN 300 220-2 (2006)) - Radio set (tested with the electronic control unit PERSEO CBD or PERSEO CBE)

Features:

  • Buried Structure: ~13.15 x h. ~33.85 in.
  • Foundation: Concrete
  • Excavation: ~39.37 x ~39.37 x ~55.12 in.
  • Break-In Resistance: 250,000 J
  • Driven Rod Treatment: AISI304 or AISI316 Stainless Steel
  • Passive Visibility: Reflective film ~3.94 in. (optional)
  • Flange: Cast-Iron, cataphoresis black
  • Top Cover: Cast-Iron, cataphoresis black
  • Acutator: Hydraulic
  • Power: 230 Vac +/- 10%, 50-60 Hz
  • Working Time: Rise Time: 5.0 s (50 Hz); Lowering time: 6.5 s (50 Hz)
  • Working Temp: -40°F - 140°F (with heater)
  • Operating Humidity: Up to 100%
  • IP Grade: IP67
  • Hand operation:
    • -Standard: Bollard will open
    • -Security: Bollard will remain up
    • Lower the bollard by means of a solenoid valve which is accessible from the ground flange.

Electrical Features:

  • Control Unit: PERSEO CBD or PERSEO CBE
  • Power: 1-Phase 230 Vac +/- 10%, 50-60 Hz (115 Vac with optional adapter)
  • IP Grade: IP54
  • Working Temperature: -40°F - 140°F
  • Operating Humidity: up to 95%, non-condensing
  • Use: Max. 4 for each control unit. Parallel control wiring possible for driving many groups of bollards.
  • Power Absorbed: 0.50 kW for each bollard
  • Power Consumption: 28 W for each bollard
  • Signalling (optional): On the top with high intensity LEDs, and buzzer(12 Vac)
  • Sensors: Open passage, Close passage (PERSEO CBE), Overpressure/Obstacle, Antitampering switch (optional)
  • Local/Remote Control: Control Options
    • Digital inputs
    • Radio remote control
    • RS485, TCP/IP (option, PERSEO CBE only)

Specification Sheet

Installation Manual

Manual

Specification Sheet

Prefer to Call? (888) 378-1028

Questions about part number P970092-1?

Required Fields *

Name *

Email *

Phone

My Questions *

SKU P970092-1
Bollard Height 600 mm (23.62 in.)
Bollard Diameter 275 mm (10.83 in.)
Operator Type No
Crash Rating Tooltip
Crash Rating is determined by the vehicle speed and weight being halted. Learn More About Crash Ratings.
Not Crash Rated
Automation Type Automatic
Bollard Model Pillar
Rise Time 5 sec.
Input Voltage 220/230/240 AC (60 Hz, 1 Phase), 230 AC (50 Hz, 1 Phase)